- ABOUT BIS (ISI MARK) FOR AUTOCLAVED AERATED CONCRETE (AAC) BLOCKS
Concrete masonry, already extensively Used in building construction abroad, is likely to make very considerable headway in this country because of the many advantages, such as durability, strength and structural stability, fire resistance, insulation, and sound absorption it possesses. Concrete masonry construction is also economical because of the following aspects:
- The units are relatively large and true in size and shape. This ensures rapid construction so that more wall is laid-per man-hour than in other types of wall construction;
- Fewer joints result in considerable saving in mortar as compared to normal masonry construction, and also in increasing the strength of the wall, and
- The true plane surfaces obtained obviate necessity of plaster for unimportant buildings situated in low rainfall areas; even when plaster is used for any reason, the quantity required for satisfactory coverage is significantly small.
BIS has formulated the Indian Standard IS 2185: Part 3:1984 (Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks).
- PROCEDURE FOR GRANT OF LICENSE:
- Application:
The procedure for grant of BIS Certification Marks License begins with the filing of application in the prescribed Application form by the manufacturer desirous of obtaining the license.
A license is granted for varieties of products covered under a given Indian Standard.
- Recording:
On scrutiny, if the application is found complete in all respects, it is recorded and assigned an application number. The application is acknowledged, and the number is conveyed to the Applicant for future reference.
- Preliminary Inspection:
3.1 Preliminary inspection of the unit is carried out on a mutually agreed date, within a month of recording of application. During this inspection the firm’s manufacturing capability and controls, quality control techniques, facilities available and the technical skills of the personnel are evaluated. Samples of products are tested and drawn for testing in BIS or other recognized laboratories.
3.2. Preliminary visits are charged to the applicant. Testing charges for the sample drawn for independent testing are required to be paid by the applicant.
- During the preliminary inspection, the Scheme of Testing and Inspection is discussed with the applicant’s management.
- Grant of License:
License to use the Standard Mark on a product is accorded only after BIS has ensured the capability of the manufacturer to manufacture the product continuously in accordance with the relevant Indian Standard. This is ensured through preliminary factory evaluation to ascertain the capability of the manufacturer to produce goods according to the relevant Indian Standard especially with respect to raw materials, process of manufacture, manufacturing capability and quality control facilities including testing equipment and supervisory staff. Samples are tested in the factory, in order to bring out any deficiencies in test equipment/testing procedures and testing personnel as well as for spot establishment of quality of product. Simultaneously, samples are also drawn for testing in the independent laboratories for assessing conformity to the relevant standard. The manufacturer is required to agree to operate a well-defined Scheme of Testing and Inspection (STI) as approved by BIS from time to time, which inter alia prescribes the specific tests and the frequency for conducting them. In order to meet the expenditure incurred by BIS in operating the license, the manufacturer also has to agree to pay a marking fee fixed by BIS for the product. License is granted only after the manufacturer agrees to these conditions and if the factory inspection and test reports are satisfactory.
- Validity:
The initial validity period of the license is one year. License can be renewed for a further period of one/two years, subject to satisfactory operation of license as observed during periodic inspections, factory & independent testing of samples drawn from factory and market.
- Road Map / Scope Of Work For ISI Marking:
- Filling of Application
- Organize the Lab Test Report (LTR)
- Submission of LTR & Request for Inspection
- Preparation of Manual & Training
- Documentations
- Inspections by the Department
- Closure of non-conformity (if any)
- Get the ISI Marking /Registration
- PLACE OF RENDERING SERVICES:
The place of rendering services generally shall be our office situated at Office No. 106, Sr No. 55, Sukhniwas, 15th August Chowk, Mangalwar Peth, Pune – 411011, Maharashtra, India.
- PROFESSIONAL FEES:
Professional fees for the assignment will be as follows:
| Sr. No. | Particulars | Amount (In INR) |
| 1. | Professional Fees | Shall be Discuss in Meeting
|
**Plus GST @ 18% applicable
**Government fees & Out of Pocket Expenses will be at actual.
- TERMS AND CONDITIONS:
- Assigner shall nominate specific person(s) for co-ordination and shall provide relevant data support in concern assignment Mr. Pramod Ladda will be assigned person.
- All the payments should be made in the name of “Ladda Bhutada & Associates”.
- All the disputes shall be subject to Pune Jurisdiction.
- Termination of this contract requires 30 days’ notice.
- GST applicable @18% separately.
- Government Fees and out of pocket expenses will be reimburse at actual.
We assure for best services from our side for your satisfaction.
Thanking you and assuring best professional services.
Sd/-
Pramodkumar R. Ladda
Company Secretary, Insolvency professional
